It is possible that it will take up to 24 hours to completely dry.
Make sure you follow these tips if you want to figure out how to remove moisture in a charging port. Put Your Phone in Front of a Fan, or Just Let It Air Dry… Pay Attention to Any Cautionary or Advisory Messages on Your Phone… Put Your Phone Into the Rice and Leave It There Overnight.
You won’t get shocked, but the possibility exists that your phone will continue to short circuit and become completely unusable. First off, ”’Rice does not work”’. It does not prevent corrosion, does not distribute any liquid within your phone or underneath its components, etc., and it will not fix any short circuits that may have occurred.
If you want to avoid causing additional damage to the device, you should turn it off and let it air dry for at least 24 hours before turning it back on or plugging it into a power source. If there is no evidence of or suspicion of moisture: To begin, connect your phone to the charger. After doing so, the error message should still appear on your screen.
If the rubber on your charger does not have any tears in it, all you need to do to prepare it for use is let it air dry before plugging it into your phone. After that, you should be good to go. You should throw away the charger and purchase a new one if it has tears in the rubber and raindrops have gotten into the cracks in the rubber.
If you receive the warning “Liquid Detected in Lightning Connector,” it indicates that either the charging port on your phone or the lighting charging cable are damp or wet.
Broken pins in the charging port of the phone are one of the telltale signs that your phone’s port has been damaged. In a similar vein, if the pins inside the port become broken or bent, it will be impossible to correctly charge the device. … Debris in Phone Charger Port. … Charger Cable and Adapter Work With Other Devices. … Faulty Phone Charger Adapter. … Defective Phone Battery.
Disable Fast Charging If you disable fast charging on your Samsung Galaxy device, the moisture-detected warning should no longer appear. The procedure to follow in order to access the setting varies from one version of the software to another. Go to Settings> Device maintenance > Battery > 3-Dot icon > Advanced settings > Fast charging and turn it off.